3D printed microscale soft robotics for dynamic navigation and integrated fluidics
This technology uses precise 3D microprinting to produce soft, pressure-responsive robotic actuators with integrated fluid channels directly on small tubes, enabling customizable shapes and efficient navigation in complex vasculature for minimally invasive biomedical applications.
Background
The field of microscale soft robotics and integrated microfluidics is emerging as a promising approach to address challenges in minimally invasive medical procedures, especially in delicate, small-scale environments such as neonatal cardiovascular interventions. There is a clear need for technology that can navigate narrow, tortuous pathways in the human body with precision, because current methods do not adequately meet the demands of safe and effective access. This need is amplified when treating vulnerable patients, where current materials and devices lack the flexibility and maneuverability required to operate within complex biological networks.
Current approaches to endovascular interventions and microfluidic device construction face significant limitations. Conventional guidewire and catheter systems often rely on rigid, inflexible designs that make precise navigation difficult in the challenging anatomy of infants and other sensitive cases. Additionally, traditional fabrication methods struggle with achieving customizable geometries and integrating fluidic pathways in a controllable manner. These challenges result in devices that do not adapt well to patient-specific anatomical variations, limiting both their efficacy and safety in clinical applications.
Technology
This technology combines advanced additive manufacturing techniques and computer-aided design to create microscale soft robotic actuators integrated with microfluidic channels directly printed onto capillaries and tubing. Utilizing precise layer-by-layer photopolymerization and two-photon direct laser writing, the process builds dual-segmented actuators that shift from a straight profile to an S-shaped curve when activated by pneumatic or hydraulic pressure. The design carefully controls bending deformation by adjusting parameters such as bellows count, curvature, and extension behavior, while seamlessly incorporating fluidic pathways that are securely sealed onto traditional substrates.
What differentiates this approach is its capability to bridge the microscale and macroscale seamlessly using an ex-situ laser writing process that directly prints and seals microstructures onto conventional tubes. Validated through finite element analysis and experimental testing, the technology reliably manages high pressure while maintaining controlled deformation essential for intricate applications. Its enhanced steering and maneuverability make it especially promising for delicate procedures, such as navigating complex vascular pathways in neonatal cardiac interventions, offering significant improvements over conventional rigid guide systems.
Benefits
- Enables precise microscale fabrication with layer-by-layer control for integrated soft robotic actuators and microfluidic channels.
- Facilitates direct fluidic sealing of microscale structures onto standard capillaries and tubing, bridging micro- and macro-scale components.
- Offers customizable actuator behavior—including configurable curvature, extension, and bellows number—to meet specific design and performance requirements.
- Provides dual design options (symmetric and asymmetric) to optimize bending configurations and adapt to varying pressure conditions.
- Improves maneuverability for neonatal and other endovascular procedures by enabling steerable guidewires that navigate complex, tortuous vasculature with minimal trauma.
Applications
- Pediatric guidewire interventions
- Steerable endovascular tools
- Neurological catheter systems
- Organ-on-a-chip microfluidics
Additional info
A process employing additive manufacturing integrates computer-aided design, two-photon direct laser writing, and vat photopolymerization to fabricate microscale soft robotic actuators with integrated microfluidic paths directly onto pretreated substrates. Dual-opposing segmented actuators transition from straight to S-shaped configurations under pneumatic or hydraulic pressure, allowing precise control of bending, curvature, and extension, as confirmed by finite element analysis and experimental testing. This approach enables steerable, patient-tailored guidewires for advanced endovascular interventions.
IP Status
US patent application 18/674396 pending
Publications
“An Approach for 3D Microprinting Soft Robotic Surgical Tools for Endovascular Interventions,” 2024 IEEE RoboSoft
“3D-Microprinted PDMS-Based Microfluidic Vessels for Organ-on-a-Chip Applications”
2024 IEEE MEMS